Switch-Tek Non-Intrusive Capacitance Level Switch

Switch-Tek Non-Intrusive Capacitance Level Switch

The general purpose non-intrusive capacitance level switch provides reliable liquid level detection of water based conductive liquids with non-coating and/or scaling characteristics with a 1A relay output. Media examples include hydrochloric, sulfuric acid and water. The liquid level sensor is bracket mounted on the exterior wall of non-metallic tanks and applied as a high level alarm or low level alarm.



Ø  Non-intrusive level detection through plastic or fiberglass walls

Ø  Installed with polyethylene, polypropylene or PVDF adhesive 3M mounting brackets

Ø  Rugged PSO enclosure rated NEMA 4X with conduit connector

Ø  60VA relay selectable NO or NC via power supply wiring polarity




Switch-Tek LP50 Datasheet


Switch-Tek LP50 Manual